top of page

All metal Products Made In The USA along with all shirts printed In the USA.

Pushrod Upgrade

Pushrod Upgrade

This is a pushrod upgrade for those having or concerned about having a bent pushrod issue. It is a slightly smaller diameter then stock with a much heavier .080 in wall made from 4130 chromoly. This will reduce risk of interference while being stronger then stock. This applies to 2014+ direct injected GM LT based V8 engines. From 2014-2018 they are equiped with AFM and have 8 AFM lifters. Those from 2019+ might be equiped with DFM. If you have DFM you should replace all 16 Pushrods. Each full set includes 16 pushrods. I offer Full Kit of 16, Half Kit of 8, a set of 4 (in case you only want to do one side on AFM engine), a pair (in case you only want to do single cylinder), and a single for those who only want one pushrod. It his highly recommended you replace all pushrods to avoid any future failures. These puchrods are originally designed for use in high performance aplications and thus should have no issue's in a stock applicaion. If you have any questions don't hesitate to ask me. I recommend double checking lenght of yours prior to purchase! This product has a lenght of 7.850 inch.

 

Pricing is based on QTY. The more you buy the better deal you get.

  • USA product

    This product is 100% made in the USA.

  • Product Brand

    You may end up with Howards Cams 19011, BTR PR7850312 or Comp Cams 7645 pushrods. It is availibility dependent. All are of equal quility and Products of the USA.

$13.25Precio
bottom of page